• vook-app-getting-started

VOOK Audio · App Guide

Getting Started

Companion App

Set up the VOOK Audio app and pair your microphone in a few minutes. This guide covers what you need, connecting your mic, naming your device, and recording with AI switched on.

✦ Free on iOS & Android
01

Overview

The VOOK Audio app is the free companion app for your VOOK wireless microphone. It connects to your mic over USB-C or Lightning for real-time control while you record, and runs a cloud Enhance engine that cleans up any recording you upload.

Live mic control is free for as long as you own the mic. AI Enhance is metered with credits, and every VOOK mic ships with a free allowance to get you started.

In the app

  • Live control over USB — free, and works offline
  • AI Enhance in the cloud — clean up any recording
  • Outputs & credits — your cleaned files and balance in one place
VOOK Audio works with every mic in the lineup — ClipX, AirMic and MiniMic.
VOOK Audio app screen

The VOOK Audio home screen — your connected mic at a glance

02

Requirements

Before you begin, make sure your phone and adapter are supported.

What you need

iOSiOS 15 or later
AndroidAndroid 10 or later
Live controlUSB-C OTG (Android), USB-C iPhone, or Lightning adapter
Works withClipX, AirMic, MiniMic
03

Connect Your Mic

Connect the VOOK receiver to your phone using the USB-C or Lightning OTG adapter. The app detects it automatically.

  1. 1Plug the receiver into your phone with the correct adapter for your device.
  2. 2Open the VOOK Audio app — it picks up the mic automatically, with no codes or pairing menus.
  3. 3Wait for the app to confirm the mic is connected.
Pro Tip
There are no pairing codes. If the app does not detect the mic, reseat the adapter and make sure it is USB-C OTG compatible.
04

Name Your Device

Give your mic a recognisable name — ClipX, Studio AirMic, whatever fits — so it is easy to identify in the app. You can change the name at any time from the device screen.

05

Enable AI & Record

With your mic connected, switch on AI and start recording in whatever app you already use.

  1. 1Switch on noise reduction in the app.
  2. 2Hear the Original vs Denoised A/B demo so you know what to expect.
  3. 3Record in any camera or recording app you already use.
Live controls — gain, noise cancellation and channel mix — work fully offline over USB. You only need an internet connection to run a recording through AI Enhance.
06

Tips

Pro Tip
Name each mic clearly if you own more than one, so you always grab the right device in a hurry.

Once set up, explore the other guides: AI Enhance for cleaning recordings, Live Mic Control for on-set adjustments, and Credits & Plans for how Enhance processing is metered.