User Guide & Support
ClipX
Wireless Microphone System
The VOOK ClipX Wireless Microphone delivers professional-grade recording quality. With its plug & play feature, no app is required. Ideal for online live broadcasts, video vlogs, program interviews, recordings, video teaching, and more.
✦ Plug & Play — No App RequiredOverview
The VOOK ClipX is a dual-channel wireless microphone system built around two Mic Transmitters and one Mic Receiver. The transmitters clip onto clothing and capture audio with their built-in microphones, transmitting it wirelessly to the receiver. The receiver plugs directly into your device — no app or driver installation needed.
Built for creators who need reliable, broadcast-quality wireless audio in a compact, always-ready package, the ClipX keeps things simple: take the transmitters and receiver out of the charging dock, connect the receiver to your phone or camera, and you're ready to record.
Get Started in Minutes
Scan this QR code to explore the product, watch setup videos, and access the latest firmware and support resources.
What's in the Box
Here's everything included in the ClipX box — all you need to start recording wirelessly right away.
Getting Started
Setup is instant. The ClipX Mic Transmitters and Mic Receiver come pre-paired — just take them out of the Charging Dock, connect the receiver to your device, and you're good to go.
Initial Setup
- 1Remove both Mic Transmitters and the Mic Receiver from the Charging Dock.
- 2The transmitter LEDs will begin flashing, indicating they are powering on and searching for the receiver.
- 3Connect the Mic Receiver directly to your smartphone. Use the included Lightning Adapter for iPhone/iPad, or connect directly via USB-C for Android devices.
- 4The receiver and transmitter LEDs turn solid once pairing is complete.
- 5Open your preferred camera or recording app and begin recording.
Using the Clip
Each VOOK ClipX Mic Transmitter features a secure integrated clip, designed to attach firmly to the edge of clothing such as a shirt collar, jacket lapel, or chest pocket. The clip keeps the microphone stable throughout your recording session.
For best audio quality, position the transmitter as high on the chest as comfortably possible — ideally within 20–30 cm (8–12 inches) of the speaker's mouth.
Position the Mic Transmitter near the speaker's collar for optimal audio pickup
How to Use
The VOOK ClipX connects directly to your smartphone or camera via the Mic Receiver. No app download or configuration required — it works as a standard plug-and-play USB audio device.
iOS (iPhone / iPad)
Connect the Mic Receiver to your iPhone or iPad using the included Lightning Adapter. The built-in Camera app will automatically detect and use the ClipX as its audio source.
Android
Connect the Mic Receiver directly to your Android device's USB-C port. If your default camera app doesn't recognise the external mic, use the Open Camera app (free on Google Play Store) and configure it as follows:
- 1Open the "Open Camera" app from the Play Store.
- 2Navigate to the app's Settings.
- 3Tap on Video Settings.
- 4Select Audio Source and choose External mic (if present).
This enables the ClipX to be used as the primary audio source for all video recordings in the app.
Open Source Camera App
Audio source
Set Audio Source to "External mic (if present)" in Open Camera settings
Cameras & Other Devices
The Mic Receiver connects to any device with a USB-C or 3.5mm audio input. For cameras with a 3.5mm mic input, use a USB-C to 3.5mm TRS adapter (not included). The ClipX will appear as a standard external microphone input.
Charging
1. Charging the Dock
Connect the Charging Dock to a power source using the included Type-C cable. The four dot LEDs on the dock show the remaining battery level.
Each lit dot represents approximately 25% of total battery capacity. All four dots lit = fully charged.
2. Charging the Mic Transmitters
Place both Mic Transmitters into the Charging Dock, aligning the charging contacts at the base. The dock's LED indicators confirm charging has started.
Place both Mic Transmitters into the Charging Dock to begin charging
You can also charge the Mic Transmitter directly via the Type-C cable. The red indicator light stays on while charging and turns off once fully charged.
LED Indicators
The ClipX Mic Transmitters and Mic Receiver use LED indicators to communicate every state. Note that the ClipX uses yellow as its "connected" indicator — distinct from other VOOK products.
Mic Transmitter (TX)
| Function | Button | LED |
|---|---|---|
| Power on (unconnected) | Long press 2s | Green blinks |
| Power off | Long press 3s | All lights out |
| Connected | — | Yellow always on |
| Noise reduction on Enabled by default | Press function btn once | Green always on |
| Noise reduction off | Press function btn once | Yellow always on |
| Mute on | Press power btn once | Red blinking fast |
| Mute off | Press power btn once | Green / Yellow on * |
| Echo mode on | Press function btn twice | Green blinking slowly |
| Echo mode off | Press function btn twice | Green / Yellow on * |
| Charging | — | Red always on |
| Fully charged | — | Red light off |
| Low battery | — | Red blinks every 5s |
* LED colour after mute/echo depends on whether noise reduction (ENC) is on or off at the time.
Mic Receiver (RX)
| Function | Action | LED |
|---|---|---|
| Power on | Auto on when plugged in | Indicator flashing |
| Power off | Auto off when unplugged | Indicator off |
| Paired with TX | Auto-connects when both power on | Indicator solid |
| Disconnected | TX powered off or out of range | Indicator flashing |
Charging Dock Indicator
The four dot LEDs on the front of the Charging Dock show the dock's remaining battery. Each dot represents approximately 25% charge — all four lit means fully charged.
Specifications
Technical specifications for the VOOK ClipX Wireless Microphone System (Model: VOOKLM02).
Audio Performance
| Polar Pattern | Omnidirectional |
| Frequency Response | 100 Hz – 10 kHz |
| Sensitivity | -38 dB |
| SNR | 64 dB |
| Sound Delay | < 20 ms |
| Sampling Rate | 48 kHz |
| Bit Depth | 16 bit |
Wireless
| Wireless Protocol | 2.4 GHz digital wireless |
| Transmission Range | Up to 30 m (line of sight) |
Mic Transmitter (TX) — ×2
| Battery Life | 6–8 hours |
| Battery Capacity | 100 mAh |
| Charging Time | Approx. 1 hour |
| Dimensions | 22 × 20 × 48 mm |
Mic Receiver (RX) — ×1
| Output Connection | USB-C (Lightning adapter included) |
| Channels | Dual-channel (2 transmitters) |
| Dimensions | 25 × 7 × 45 mm |
Charging Dock
| Battery Life | Up to 40 hours additional charge |
| Battery Capacity | 600 mAh |
| Charging Time | Approx. 2 hours |
| Input / Output | 5V/1A · 5V/0.5A |
| Indicator | 4-dot LED battery level display |
| Dimensions | 80 × 40 × 65 mm |
| Weight (with dock) | 120 g |
Operating Conditions
| Working Temperature | 0°C ~ 50°C |
| Storage Temperature | -20°C ~ 60°C |