All topics
Knowledge Base
Troubleshooting
- Mic connected but no voice is capturedCheck the following step by step: Mic is not muted in the VOOK app. Recording app has microphone permission granted in…
- Mic connected but not recording at allTest with a different recording app to isolate whether it is an app issue or mic issue.
- Voice not recorded properlyCheck that: the mic is not muted in the app, external mic is selected as audio input in your recording app, and the TX…
- Video records but mic audio is missingGo to your camera app settings and select 'External Microphone' as the audio source. If the option is not available…
- Android camera app doesn't record the mic's audioThe default Android camera app does not support external microphones. Please use a third-party app such as 'Open Camera'…
- No sound in live streamingIn your streaming app (YouTube, Instagram, etc.), go to audio/mic settings and select the external microphone (VOOK…
- My mic is not connecting. What should I do?Check that OTG is enabled on your Android phone.
- Phone does not detect the micRestart the phone and reconnect the receiver.
- App shows device but it is not respondingDisconnect and reconnect the receiver. If still unresponsive: press the reset button on the mic (if available), then…
- Receiver (RX) and Transmitter (TX) are not pairingTurn OFF both units completely. Turn ON the receiver first — wait until its LED is stable.
- Mic does not enter pairing modePower OFF the mic completely, wait 5 seconds, then turn it ON again.
- Receiver does not work at allCharge the receiver fully and test with a known working cable. Test on another supported device.
- Older VOOK mic not connecting to the appOlder VOOK mic models may not support HID app control. Check your product model number on the VOOK website to confirm…
- Audio cuts in and outMaintain a clear, unobstructed line-of-sight between the transmitter and receiver. Avoid placing the receiver in a bag…
- Mic keeps disconnectingCheck that the transmitter battery is not low — charge it fully. Reduce the distance between TX and RX (stay within…
- Sound breaks during recordingMaintain a clear line-of-sight between the transmitter and receiver. Avoid obstacles like walls, bodies, or large…
- Very short operating rangeTest in an open area without walls or obstacles. Interference from other wireless devices (WiFi, Bluetooth) can…
- Too much background noiseEnable ENC noise reduction in the app. Record in a quieter environment where possible.
- Mic picks up surrounding soundLavalier mics pick up surrounding sound by design. To reduce ambient noise: Enable ENC noise cancellation in the app.…
- Hissing or static soundMove away from potential interference sources: WiFi routers, LED lights, other wireless devices. Reconnect the receiver…
- I hear cracking, whistle, or beep soundsThis is usually caused by wireless interference or low battery. Move away from WiFi routers, LED lights, and other…
- Voice is distortedLower the Volume in the VOOK Audio app by one level to stop clipping. Move the mic slightly further from your mouth…
- Constant distortion even with correct settingsTry the following steps in order: Lower the Volume in the app to avoid input clipping. Enable ENC noise reduction. Keep…
- Wind noise during recordingAttach the wind foam cover to the microphone — this is the most effective solution. Clip the mic inside your collar so…
- Clothing rubbing noiseReposition the mic clip to prevent fabric from rubbing directly against the microphone capsule. Route the cable under…
- Noise cancellation (ENC) is not workingToggle ENC OFF, wait 3 seconds, then toggle it back ON. Restart the mic and reconnect to the app.
- Full noise cancellation causes echoThis happens when the noise cancellation level is too high for the room environment. Reduce the noise cancellation to a…
- Poor sound clarityCheck mic placement — clip the transmitter high on the chest, within 20–30 cm (8–12 inches) of the mouth. Enable noise…
- Audio is too lowRaise the Volume in the VOOK Audio app by one level (levels 1–4).
- One mic louder than the otherSet equal volume levels for both microphones in the VOOK app.
- One transmitter records voice at a different levelPossible causes: Different placement distance of the two TXs from the speaker. One TX volume is set lower in the VOOK…
- Left and right channels reversedCheck the channel settings in your recording app and swap them if needed. This is a software-level setting and does not…
- Can I see my mic's battery level in the app?Yes, on supported VOOK models the battery level of the transmitter is visible in the app. Connect the mic and check the…
- Battery draining fastComplete one full charge cycle (drain fully, then charge uninterrupted to 100%). Power OFF the mic after every use …
- Mic not chargingClean the charging pins on both the mic and the cable/case using a dry cotton swab. Try a different USB cable and a…
- Charging case is not charging the micEnsure the charging case itself has sufficient charge (check its LED indicator). Check for dust or debris on the…
- One transmitter is not charging or will not turn ONPlace it in the charging case or connect it directly via cable for at least 30 minutes, then hold the power button for…
- Mic charges only up to 80% and never reaches full chargeSome devices use smart charging that slows or stops at 80% to protect battery life. First try: Use a different cable and…
- Mic turns off during recordingCheck the battery level before starting — charge fully if below 30%. Check if auto power-off is enabled in the app…
- LED blinking continuouslyContinuous blinking usually indicates one of two things: Rapid blinking: the mic is in pairing/discovery mode. Slow…
- Mic overheatingPower OFF the mic immediately and allow it to cool down in a ventilated area. Do not charge and use the mic…
- Charging pins damagedDo not attempt to bend or clean damaged pins with metal objects. Take clear photos of the pins and contact support …
- Not working on USB-C phonesEnsure your phone supports USB audio output and OTG (On-The-Go). Enable OTG in phone settings (Settings → Additional…
- Not working with Samsung S23 FE / Motorola Edge 50 ProEnable OTG in phone settings and restart the phone. Grant microphone permission to the VOOK app. Confirm that your…
- Not working on iPhone 13 / 14 / 15Use the correct Lightning or USB-C receiver designed for iPhone. Allow microphone access for the app you record with…
- No sound on DSLR / Canon R7Use a TRS (3-pole) cable — not TRRS (4-pole) — for DSLR/camera connections. In camera settings, set audio input to…
- Transmitter works on a phone but not on a cameraCameras require a TRS (3-pole) cable — a TRRS (4-pole) cable will not carry audio correctly. Also check: Camera audio…
- Bluetooth headphones stop working with the mic connectedMost phones allow only one active USB/external audio device at a time. When the VOOK mic is connected via USB/OTG, it…
Need more help?
Our team is here for you
Can’t find what you’re looking for? Raise a ticket or reach us directly — Mon–Sat, 10 AM–6 PM IST.
To help us solve it faster, include your phone model, VOOK mic model, app version, screenshots and, if you can, a short sample recording or video.
